Space-E CAM

Space-E CAM "Process Design Technology" has a mechanism to meet customer's requirements, such as, various pallets and templates which contains customer’s know - how. Easy to operate will enable a beginner to create NC data quickly.

CREATION

Countour Roughing

Countour Roughing

Create tool path in rest parts when setting the value bigger than the tool radius in XY pitch of flat tool and radius tool.

Countour Roughing

Roughing considers the stock model cut by the previous process. It enables you to create a more efficient cutting path to cut the rest of material.

Contour Finishing

Contour Finishing

Create a path automatically to unfinished areas such as a gentle slope area.

Free Shape

Free Shape

Because this command can change any wire frame to a tool path, it can create a tool path for grooving.

3.5D to 5 Axis Conversion

3.5D to 5 Axis

Create a 2.5-Axis and a 3-Axis data easily if you specify the cutting direction on the Modeler.
Dividing angles are calculated from the coordinate systems and create cutting data from multiple directions in a single cutting process.

WIRE EDM

WIRE EDM

Easy to create wire EDM data using a 3D viewer.

EDIT

Path Optimization

Path Optimization

Divide a tool path at the shank and holder interference. Remove or extract shank and holder interference. It enables you to cut a part as much as possible with the current tool.

Cutting Simulation

Cutting Simulation

Cutting simulation can be started from the middle of the process.
Rest parts are displayed by the color map.

Cutting simulation/Check holder Interference (Batch).

Cutting simulation

Interference of the tool can be checked at once. Confirm the tool path of interference using the Modeler.

OTHER

Cutting process design

Cutting process design

Easy operation by cutting process.

CAMWEB

CAMWEB

Cutting Order Sheet is automatically created in HTML or Excel format. Customers can design their own sheet format.

Tool Data Base

Tool Data Base

Provide data of the tool maker as a tool file of Space-E/CAM. Contains the cutting conditions (feed, spindle, pitch) of the tool maker.

Postprocessor

Postprocessor

Create a post that complies with FANUC in a simple operation by GUI. Output the required information for cutting in NC data.

Want to learn more about this solution?
Please contact to us: Sales.NDVN@nttdata.com